Forum > General Discussion > Small Spots Of Lost Colour - What Causes This?

Monkey Posted 23-Jul-2014 07:15
Joined:

Posts:
23-Jul-2014

2
Guys;
I've started dipping as a time saving alternative to airbrushing. I've done ok on the first few but on some I've seen small blotches of lost pattern. Can anyone suggest why? All materials are from Hydro Warehouse, temp is at 30-32 degree and soak time 1 minute with a 10 second max wait after activate.

Report Abuse
 
Hydro-H Posted 21-Aug-2014 12:34
Joined:

Posts:
13-Nov-2012

90
Hi, it could be many things depending on your set up. Are you using aerosol, HVLP gun ? In a phrase.....activator application. If you can rule out water in your lines, gun set up and other contamination then under activation is almost certainly the problem. Can you tell us more about your setup ? activator brand and application method etc

Report Abuse
 
HawkOwl Web Design